民用航空发动机型号审定概念设计阶段风险模型

为了在审定项目概念设计阶段识别潜在风险并规划处理措施以提高审定效率,通过综合条款分类统计、符合性方法及实施风险、技术要点解析等方法建立了典型民用航空发动机概念设计阶段工作模型,并开发了条款工作状态信息表。模型在某型民用航空发动机型号审定的实施识别了278项潜在风险,并针对典型结构完整性条款从要求确定到设计实现各个过程的潜在风险进行了详细分析,验证了模型的有效性。     

不同环境因素对引压管腔动态特性影响

为了探索引压管腔在动态压力校准和使用中不同环境因素对动态特性的影响,推导了管腔传压模型和谐振频率关系式,确立了影响管腔动态特性的参数,包括静态压力、温度、气体介质等。采用引压管腔专用实验装置进行了不同环境参数状态的实验验证,结果表明:静态压力仅会影响管腔在谐振频率附近的输出,随着静态压力的增大而非线性增大,对动态特性并无明显改变;温度会改变管腔的谐振频率和动态特性,随着温度的升高,谐振频率增大但输出幅值随之减小;气体介质的不同会彻底改变管腔动态特性,主要取决于介质的声速。该研究为引压管腔在使用环境下数据的评价和数据修正上提供了一定参考依据。     

Water takeoff performance calculation method for amphibious aircraft based on digital virtual flight

Owing to the strong coupling among the hydrodynamic forces, aerodynamic forces and motion of amphibious aircraft during the water takeoff process, the water takeoff performance is difficult to calculate accurately and quickly. Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls, a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff. A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle, flight velocity and other parameters during water takeoff. Combined with the aerodynamic model, engine thrust model and aircraft motion model, a digital virtual flight simulation model is developed for amphibious aircraft during water takeoff, and a calculation method for the water takeoff performance of amphibious aircraft is proposed based on digital virtual flight. Typical performance indicators, such as the liftoff time and liftoff distance, can be obtained via digital virtual flight calculations. A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%, which verifies the correctness and accuracy of the proposed method. This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes, and the relevant calculation results can also provide a theoretical reference for the formulation of flight test plans for airworthiness certification.     

空间电动力绳系电流峰值点变化规律研究

为研究电流峰值点在几种影响因素下的变化规律,建立一种能够捕捉绳系电子发射与收集自洽平衡过程的新算法——电路空间耦合算法。为验证该方法的计算精度,以1.35kW霍尔推力器为等离子体源,在真空舱内开展绳系的电荷收集试验,在电路参数方面,计算精度约为12.8%,在场参数方面,计算精度约为3.6%。在此基础上,针对不同偏置电压、绳系长度以及绳系直径,对绳系的绳上电流分布、电势分布以及空间电势分布等参数进行数值计算。结果显示:电动力绳系的电流峰值点会随着偏置电压升高、绳系长度增加及绳系直径增大而发生比例上的向阳极端漂移,揭示了电子轨道运动限制的机制在各类壁面电荷输运机制中占优,导致电流峰值点漂移的产生。     

Sensitivity analysis of flowfield modeling parameters upon the flow structure and aerodynamics of an opposing jet over a hypersonic blunt body

Implementation of an opposing jet in design of a hypersonic blunt body significantly modifies the external flowfield and yields a considerable reduction in the aerodynamic drag. This study aims to investigate the effects of flowfield modeling parameters of injection and freestream on the flow structure and aerodynamics of a blunt body with an opposing jet in hypersonic flow. Reynolds-Averaged Navier-Stokes (RANS) equations with a Shear Stress Transport (SST) turbulence model are employed to simulate the intricate jet flow interaction. Through utilizing a Non-Intrusive Polynomial Chaos (NIPC) method to construct surrogates, a functional relation is established between input modeling parameters and output flowfield and aerodynamic quantities in concern. Sobol indices in sensitivity analysis are introduced to represent the relative contribution of each parameter. It is found that variations in modeling parameters produce large variations in the flow structure and aerodynamics. The jet-to-freestream total-pressure ratio, jet Mach number, and freestream Mach number are the major contributors to variation in surface pressure, demonstrating an evident location-dependent behavior. The penetration length of injection, reattachment angle of the shear layer, and aerodynamic drag are also most sensitive to the three crucial parameters above. In comparison, the contributions of freestream temperature, freestream density, and jet total temperature are nearly negligible.     

空心气冷低压涡轮动叶气热耦合数值模拟

以空心气冷低压涡轮动叶为研究对象,采用高质量的流体域和固体域网格控制技术,带转捩模型的双方程SST湍流模型,开展了基于CFD方法的叶片气热耦合问题研究。获得了不同冷气流量比(分别为1.0%,1.38%,1.8%和2.2%)、温比(分别为2.1,2.25,2.3,2.4和2.5)和压比(分别为1.4,1.6和1.8)对叶片换热特性的影响规律,设计状态中截面按弧长平均的叶片壁面金属温度计算值较试验值偏小0.3%,气热耦合计算的叶片壁面温度分布与试验结果吻合良好,验证了气热强耦合计算方法的精度,为涡轮叶片温度场分析提供了一种有效的方法。     

电火工品电磁建模及仿真分析

以常规结构电火工品为研究对象,在分析电磁环境对火工品作用机理的基础上,采用ANSYS HFSS电磁仿真软件建立火工品电磁模型,按照GJB 786-89《预防电磁场对军械危害的一般要求》加载典型电磁能量,从感应射频电流和损耗功率2个层面,分别研究电磁环境对电火工品的安全性影响,并给出仿真结果。     

反潜直升机使用吊放声呐持续跟踪潜艇作战使用方法及其效能仿真

根据反潜直升机及其机载探测器材的特点以及跟踪潜艇的特点和要求,研究提出了反潜直升机使用吊放声呐持续跟踪潜艇的"两侧交替、同步运动、长时听测、动态修正"作战使用方法,并对其效能进行了仿真。仿真结果验证了所提出作战使用方法的合理性和有效性。文章可为反潜直升机的训练和作战提供参考。     

民用航空发动机引气系统部件寿命建模

针对飞机维修工作中发动机引气系统故障率较高问题,以寿命数据分析为基础,运用威布尔分布模型定量评估航空发动机部件可靠性,建立了民用航空发动机引气系统部件可靠性寿命模型。以V2500发动机引气系统为例,收集了该系统的可靠性数据,分析了部件的非计划拆换情况。在数据计算过程中采用3参数威布尔分布模型对引气系统部件的寿命数据进行拟合。假设检验结果表明,在对部件进行寿命可靠性分析时,运用威布尔分布建立的数学模型符合客观规律,且能够取得良好的拟合效果。依据计算出的部件可靠性特征量对部件的可靠性状况进行定量评估,结果表明:在评估复杂机械电子系统的可靠性时,威布尔分布模型具有较大应用价值。     

基于飞行签派员的航空公司运行效率提升研究

航空公司运行控制中心是航空公司的核心,而飞行签派员又是运行控制中心的核心,运行控制中心的 效率直接影响到航空公司的运行安全与效益。根据航空公司飞行签派员的特点和管理现状,对效率量化和效 率评估进行分析研究,采用改进层次分析法(AHP)和物元可拓模型相结合的方法,建立适合我国航空公司飞 行签派员运行效率评估模型;针对评价指标在实际情况下更具有针对性和可操作性,提出4项准则和16项指 标组成的基于签派员航空公司运行效率评价指标体系,并进行算例分析。结果表明:所构建的评价指标体系合 理有效,能够真实反映出航空公司的运行效率与飞行签派员、运控设备、AOC组织结构与工作环境和航空公司 管理规定有着密切联系,为公司运行效率的提升提出理论依据。